inventec milwaukee 10 mw10 a02 mp 1
Technical Specifications
Technical Summary
The Inventec Milwaukee 10 motherboard, documented under board number A021310A2109401 revision A02 dated 20-Mar-2007, is built around the Intel Merom CPU platform paired with the ICH8-M southbridge and Crestline graphics architecture supporting an MXM (GM NA) discrete GPU. System memory consists of two DDR2 SODIMM slots. The embedded controller is a Winbond W8769D, and the audio codec is a Realtek ALC268. The BIOS is stored on an SPI EEROM. Power management is handled by a TI BQ24721 QFN 32 charging IC within a System Charger & DC/DC architecture, alongside an IMVP-6 VR. The board integrates a Marvell 10/100 8039 LAN controller, a TI 8412 card reader, a TI 8402 USB hub, and an HDMI transmitter. Thermal monitoring is provided by a GMT G680LT1 SOT23 5P sensor.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769D.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN 32 package.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC268.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | Milwaukee 10 |
| Motherboard Manufacturer | Inventec |
| Project Code | Milwaukee 10 |
| Board Number | A021310A2109401 |
| Revision | A02 |
| Date | 20-Mar-2007 |
| CPU Platform | Merom |
| PCH / Southbridge | ICH8-M |
| EC / KBC | Winbond W8769D |
| Audio Codec | Realtek ALC268 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | TI BQ24721 QFN 32 |
| Charger Architecture | System Charger & DC/DC |
| RAM Type | DDR2 |
| RAM Architecture | DDR2_SODIMM0, DDR2_SODIMM1 |
| RAM Quantity / Slots | 2 |
| Card Reader IC | TI 8412 |
| USB Hub IC | TI 8402 |
| LAN IC | Marvell 10/100 8039 |
| WiFi / WLAN IC | Mini Card |
| HDMI Level Shifter | HDMI Transmitter |
| GPU Type | MXM (GM NA) |
| Graphics Architecture | Crestline |
| dGPU Chip Number | MXM (GM NA) |
| Thermal Sensor | GMT G680LT1 SOT23 5P |
| Power IC(s) | System Charger & DC/DC, VR (IMVP-6) |
| Document Number | CSA3633 |
Technical Summary
The Inventec Milwaukee 10 motherboard, documented under board number A021310A2109401 revision A02 dated 20-Mar-2007, is built around the Intel Merom CPU platform paired with the ICH8-M southbridge and Crestline graphics architecture supporting an MXM (GM NA) discrete GPU. System memory consists of two DDR2 SODIMM slots. The embedded controller is a Winbond W8769D, and the audio codec is a Realtek ALC268. The BIOS is stored on an SPI EEROM. Power management is handled by a TI BQ24721 QFN 32 charging IC within a System Charger & DC/DC architecture, alongside an IMVP-6 VR. The board integrates a Marvell 10/100 8039 LAN controller, a TI 8412 card reader, a TI 8402 USB hub, and an HDMI transmitter. Thermal monitoring is provided by a GMT G680LT1 SOT23 5P sensor.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769D.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN 32 package.
Q: What audio codec is used on this motherboard?
A: The audio codec is a Realtek ALC268.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
