toshiba satellite a200 inventec milwaukee 10 6050a2109401 schematic
toshiba satellite a200=1=inventec milwaukee 10 6050a2109401.pdf
Technical Specifications
Technical Summary
The Inventec Milwaukee 10 (CSA3631X01 Rev 3) motherboard is built around the Intel Merom CPU platform and ICH8-M southbridge, supporting DDR2 memory at 533/667 MHz across two SODIMM slots. Graphics are handled by an MXM module based on the Crestline architecture. The system uses a TI BQ24721 QFN-32P charging IC for battery and adapter management. The embedded controller is a Winbond W8769, and the audio codec is an ADI 1884. Networking is provided by a Marvell 10/100 8039 controller, with wireless connectivity via a Mini Card WLAN module. The board includes a 5-in-1 card reader, an HDMI transmitter, and a SATA_0 BIOS SPI flash.
Technician FAQ
Q: What EC/KBC is used on the Inventec Milwaukee 10?
A: The embedded controller is a Winbond W8769.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What audio codec is used on the Inventec Milwaukee 10?
A: The audio codec is an ADI 1884.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
toshiba satellite a200=1=inventec milwaukee 10 6050a2109401.pdf
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | Milwaukee 10 |
| Motherboard Manufacturer | Inventec |
| Project Code | Milwaukee 10 |
| Board Number | CSA3631X01 |
| Revision | 3 |
| Date | 14-Sep-2006 |
| CPU Platform | Merom |
| PCH / Southbridge | ICH8-M |
| EC / KBC | W8769 |
| Audio Codec | ADI 1884 |
| BIOS / SPI Flash | SATA_0 |
| Charging IC | TI_BQ24721_QFN_32P |
| Charger Architecture | System Charger & Battery |
| RAM Type | DDR2_SODIMM0, DDR2_SODIMM1 |
| RAM Architecture | DDR2 Interface, 533/667 MHz |
| RAM Quantity / Slots | 2 |
| Card Reader IC | 5 in 1 Card Slot |
| LAN IC | Marvell 10/100 8039 |
| WiFi / WLAN IC | Mini Card Wireless LAN |
| HDMI Level Shifter | HDMI Transmitter |
| GPU Type | MXM(GM NA) |
| Graphics Architecture | Crestline |
Technical Summary
The Inventec Milwaukee 10 (CSA3631X01 Rev 3) motherboard is built around the Intel Merom CPU platform and ICH8-M southbridge, supporting DDR2 memory at 533/667 MHz across two SODIMM slots. Graphics are handled by an MXM module based on the Crestline architecture. The system uses a TI BQ24721 QFN-32P charging IC for battery and adapter management. The embedded controller is a Winbond W8769, and the audio codec is an ADI 1884. Networking is provided by a Marvell 10/100 8039 controller, with wireless connectivity via a Mini Card WLAN module. The board includes a 5-in-1 card reader, an HDMI transmitter, and a SATA_0 BIOS SPI flash.
Technician FAQ
Q: What EC/KBC is used on the Inventec Milwaukee 10?
A: The embedded controller is a Winbond W8769.
Q: What charging IC is used on this motherboard?
A: The charging IC is a TI BQ24721 in a QFN-32 package.
Q: What audio codec is used on the Inventec Milwaukee 10?
A: The audio codec is an ADI 1884.
Q: What LAN controller is used on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
