inventec milwaukee 10 mw10 x02 ws2 1
Technical Specifications
Technical Summary
The Inventec Milwaukee 10 motherboard, board number CSA3631X01 revision 3, dated 14-Sep-2006, is built around the Intel Merom CPU platform paired with the ICH8-M southbridge. Graphics are handled by an MXM module based on the Crestline architecture. The system memory architecture consists of two DDR2 SODIMM slots operating at 533/667 MHz. The embedded controller is a Winbond W8769, and the audio codec is an Analog Devices ADI 1884. The BIOS is stored on an SPI EEROM. Wired networking is provided by a Marvell 10/100 8039 controller, while wireless connectivity is supported via a Mini Card slot. The charging subsystem is managed by a Texas Instruments BQ24721 system charger and battery changer IC.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769.
Q: What is the charging IC on this motherboard?
A: The charging IC is a Texas Instruments BQ24721 in a QFN-32 package.
Q: What is the audio codec on this motherboard?
A: The audio codec is an Analog Devices ADI 1884.
Q: What is the LAN controller on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Technical Specifications
| Parameter | Value |
|---|---|
| Brand | Inventec |
| Model | Milwaukee 10 |
| Motherboard Manufacturer | Inventec |
| Project Code | Milwaukee 10 |
| Board Number | CSA3631X01 |
| Revision | 3 |
| Date | 14-Sep-2006 |
| CPU Platform | Merom |
| PCH / Southbridge | ICH8-M |
| EC / KBC | W8769 |
| Audio Codec | ADI 1884 |
| BIOS / SPI Flash | SPI EEROM |
| Charging IC | TI_BQ24721_QFN_32P |
| Charger Architecture | System Charger & Battery Changer |
| RAM Type | DDR2_SODIMM0, DDR2_SODIMM1 |
| RAM Architecture | DDR2 Interface, 533/667 MHz |
| RAM Quantity / Slots | 2 |
| LAN IC | Marvell 10/100 8039 |
| WiFi / WLAN IC | MINI CARD |
| Card Reader IC | Card reader |
| USB Hub IC | USB2 |
| GPU Type | MXM(GM NA) |
| Graphics Architecture | Crestline |
Technical Summary
The Inventec Milwaukee 10 motherboard, board number CSA3631X01 revision 3, dated 14-Sep-2006, is built around the Intel Merom CPU platform paired with the ICH8-M southbridge. Graphics are handled by an MXM module based on the Crestline architecture. The system memory architecture consists of two DDR2 SODIMM slots operating at 533/667 MHz. The embedded controller is a Winbond W8769, and the audio codec is an Analog Devices ADI 1884. The BIOS is stored on an SPI EEROM. Wired networking is provided by a Marvell 10/100 8039 controller, while wireless connectivity is supported via a Mini Card slot. The charging subsystem is managed by a Texas Instruments BQ24721 system charger and battery changer IC.
Technician FAQ
Q: What EC/KBC is used on this motherboard?
A: The embedded controller is a Winbond W8769.
Q: What is the charging IC on this motherboard?
A: The charging IC is a Texas Instruments BQ24721 in a QFN-32 package.
Q: What is the audio codec on this motherboard?
A: The audio codec is an Analog Devices ADI 1884.
Q: What is the LAN controller on this motherboard?
A: The LAN controller is a Marvell 10/100 8039.
Technical data structured and organized by Dr-Bios.com, based on original schematic source analysis.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Indexed motherboard components
Open a component to see every indexed schematic that uses the same part.
Attachments
Last edited:
