Schematic toshiba ac100 paz00 la-6352p rev 1.0a schematic

Admin

Founder
Staff member
Admin

Reputation:

toshiba ac100 paz00 la-6352p rev 1.0a




Technical Specifications

ParameterValue
BrandCompal
ModelPAZ00
Motherboard ManufacturerCompal Electronics, Inc.
Document Number332
Revision1.0a
Date2010-07-15
CPU PlatformNvidia Tegra T20
EC / KBCENE KBC KB926
Audio CodecALC5632
BIOS / SPI FlashSPI ROM
Charging ICTI TPS658621
RAM TypeDDR2 SDRAM
RAM Architecturefour x4 DDRII
RAM Quantity / Slots4
LAN ICSMSC USB 2514, SMSC USB 2512
WiFi / WLAN ICWIFI
HDMI Level ShifterSN75LVDS83
Card Reader ICSD/MMC conn
USB Hub ICSMSC USB 2514, SMSC USB 2512
GPU TypeNvidia Tegra T20
Graphics ArchitectureLVDS
Power IC(s)TI TPS658621, Intersil 29011
Thermal SensorADI ADT7421
Audio AmplifierTPA6017
TPMST19NP18
USB PHYUSB3315
G-SensorBosch BMA150
Light SensorIntersil 29011
eMMCeMMC(4/8/16/32GB)
NAND FlashNAND Flash (128M)

Technical Summary

The Compal PAZ00 schematic, revision 1.0a dated 2010-07-15, documents a motherboard built around the Nvidia Tegra T20 platform. The system memory architecture consists of four DDR2 SDRAM devices in a four x4 DDRII configuration. System management is handled by an ENE KBC KB926 embedded controller. The audio subsystem uses an ALC5632 codec paired with a TPA6017 audio amplifier. Power management is provided by a TI TPS658621 charger IC and an Intersil 29011 DC/DC interface. The board includes an SPI ROM for BIOS/SPI flash storage. Connectivity is supported by SMSC USB 2514 and SMSC USB 2512 USB hub ICs, along with a WIFI module. Display output is managed via an SN75LVDS83 LVDS bridge. Additional onboard components include an ADI ADT7421 thermal sensor, a Bosch BMA150 G-sensor, an Intersil 29011 light sensor, an ST19NP18 TPM, and a USB3315 USB PHY. Storage options include eMMC (4/8/16/32GB) and NAND Flash (128M).

Technician FAQ

Q: What EC/KBC is used on this motherboard?

A: The ENE KBC KB926 is used as the embedded controller.

Q: What is the memory configuration on this board?

A: The board uses four DDR2 SDRAM devices in a four x4 DDRII configuration.

Q: What audio codec and amplifier are used?

A: The audio codec is an ALC5632, and the audio amplifier is a TPA6017.
 

Attachments

  • Toshiba_AC100=PAZ00_LA-6352P_Rev_1.0a_DR-BIOS.COM.zip
    908.9 KB · Views: 4
Last edited by a moderator:
Who is viewing this thread?

There are currently 0 members watching this topic

Users who has read this topic
Top